General Specifications - ICP DAS USA ET-7000 Series User Manual

Chapter 1 Introduction

1.2. General Specifications

System
CPU
EEPROM
SRAM
FLASH ROM
Built-in Watchdog Timer
Communication Interface
Ethernet Port
LED indicators
System Run Indicator
Ethernet (Link/Active)
Ethernet (10/100M)
Isolation
I/O Isolation
Ethernet Isolation
Power
Power requirements
Power consumption
General environment
Operating temperature
Storage temperature
Relative humidity
Mechanical
Dimensions (W × H × D)
Installation
I/O Components
ET-7000 AIO User Manual, Apr. 2009, V1.04,
80186-80 or compatible
16 KB
512 KB
512 KB
Yes
10/100Base-TX Ethernet Controller, RJ-45 Port
Yes
Yes
Yes
Dependent on the type of ET-7000 module. (Please refer to "Sec 1.3 Module
Selection" for more detailed information)
1500 V
DC
+10 ~ +30 V (non-regulated)
DC
Dependent on the type of ET-7000 module. (Please refer to "Sec 1.3 Module
Selection" for more detailed information)
-25 ~ +75 °C
-30 ~ +80 °C
5 ~ 90% RH, non-condensing
72 mm x 123 mm x 35 mm
DIN rail, wall or piggyback mounting
Dependent on the type of ET-7000 module, please refer to the next chapter for
more detailed I/O specifications.
EMH-011-104----------12