Replace The Datatrak Fuse - Graco EcoQuip 2 EQm Instruction Manual

Repair

Replace the DataTrak Fuse

To reduce the risk of fire and explosion, the fuse
must be replaced in a non-hazardous location.
Use only an approved replacement fuse (see table).
Use of an unapproved fuse will void Graco's
warranty.
Replace Fuse
1. Remove the screw, metal strap, and plastic holder.
2. Pull the fuse away from the board.
3. Replace with an approved fuse.
34
Approved Fuses
DataTrak Part Series Letter
Number
17K057 A or B
C and later
All other part
numbers
B and later
Fuse
ti11994b
Fuse Required
24C580
24V216
A 24C580
24V216
3A3489T