Zelzah
- Multidimentional Phaser
Power Up Modes Quick Reference
Global parameters and functions can be accessed via a power up
procedure. All power up functions persist through power cycles.
Press and hold the ON (6-Stage) footswitch while connecting power
to Zelzah. Once BOTH LEDs start blinking, release the footswitch.
Adjust the desired functions with the knobs and buttons noted below.
Press either footswitch to store your changes and exit power up
mode.
BYPASS MODE
(See
page 14
for an
illustrated description.)
INPUT LEVEL
(See
page 13
for an
illustrated description.)
FACTORY RESET
(See
page 31
for an
illustrated description.)
Turn SPEED (6-STAGE) knob - status
shown on ON (6-STAGE) LED
True Bypass:
GREEN
Buffered Bypass:
Turn SPEED (4-STAGE) knob - status shown
on SPEED (4-STAGE) LED
Instrument:
GREEN
Line:
RED
Turn DEPTH (4-STAGE) knob from 0% to
100% and back two (2) times - status shown
on BOTH LEDs.
(default)
RED
(default)
pg 37