Table of Contents
Advertisement
Zelzah
- Multidimentional Phaser
External Control - Expression Pedal Setup
Use a TRS expression pedal to control the knobs of Zelzah.
Configure the EXP/MIDI jack for Expression mode.
1
(See
page 15
Connect an expression pedal to the EXP/MIDI jack of Zelzah
2
using a TRS cable.
Press and hold both footswitches until both LEDs blink GREEN.
3
Rock the expression pedal to the HEEL position. Only the ON
4
(4-STAGE) LED will blink GREEN.
Set the knob(s) you would like to control to the desired settings for
5
the HEEL position of the expression pedal. Only the ON (4-STAGE)
LED will turn RED.
for configuration instructions.)
INPUT
MONO
STEREO
IN
OUT L
RIGHT IN
USB
OUT R
LEFT OUT
RIGHT OUT
EXP
USB
MIDI IN
MIDI OUT
pg 17
Advertisement
Table of Contents
