Table of Contents
Advertisement
Zelzah
- Multidimentional Phaser
MIDI Functionality – Configuring Zelzah to Use MIDI
Step 3 – Set MIDI Out Mode: Determines what kind of MIDI data will be
sent out of Zelzah.
Press and hold the ON
1
(4-STAGE) footswitch while
connecting power to the
pedal. Once both LEDs flash,
release the footswitches.
Turn the MIX knob to select
2
what kind of MIDI data is
sent from Zelzah to other
MIDI devices. Both LEDs
will flash momentarily to
indicate status.
OFF:
RED
(default) - No
MIDI messages are sent
out of Zelzah.
THROUGH:
Out without any additional MIDI messages generated by Zelzah.
SEND CC PC OTHER: WHITE - MIDI CC, PC, and Sysex messages
generated by Zelzah are all sent to the MIDI Out.
SEND CC OTHER:
generated by Zelzah are sent to the MIDI Out.
SEND PC OTHER:
generated by Zelzah are sent to the MIDI Out.
SEND OTHER:
sent to the MIDI Out
Press either footswitch to store the MIDI Out mode and exit.
3
BLUE
- Incoming MIDI messages are sent to the MIDI
GREEN
- MIDI CC and Sysex messages
PURPLE
- MIDI PC and Sysex messages
AMBER
- Sysex messages generated by Zelzah are
SWEEP
RESONANCE
classic
barber
env
SPEED
phase
MIX
DEPTH
multidimensional phaser
(cont.)
o
mild
strong
SPEED
time
VOICE
DEPTH
pg 27
Advertisement
Table of Contents
