Table of Contents
Advertisement
Zelzah
- Multidimentional Phaser
MIDI Functionality – Configuring Zelzah to Use MIDI
Step 2 – Set MIDI channel: This determines which MIDI channel Zelzah
will use to send and receive MIDI data. To select channel 4-16, you will
need to connect Zelzah to a MIDI device.
Press and hold the ON (4-STAGE) footswitch while connecting
1
power to the pedal. Once both LEDs flash, release the footswitch.
classic
barber
env
SPEED
DEPTH
SPEED knob selections:
Channel 1:
Channel 2:
Channel 3:
Channel 4-16:
Once the LED turns BLUE, it will blink until the pedal receives a MIDI
Program Change message. Once a message is received, the pedal
will be set to the MIDI channel that carried the message and exit the
power-up mode to start using Zelzah.
SWEEP
RESONANCE
o
mild
strong
phase
time
MIX
VOICE
multidimensional phaser
GREEN
(default)
AMBER
RED
BLUE
(Requires 1⁄4" MIDI connection.)
Turn the SPEED
2
(4-STAGE) knob
to set the MIDI
communication
SPEED
channel. ON (4-STAGE)
LED indicates status.
DEPTH
(cont.)
pg 25
Advertisement
Table of Contents
