Table of Contents
Advertisement
Zelzah
- Multidimentional Phaser
External Control – Using MultiSwitch Plus
Selecting and saving Zelzah presets using MultiSwitch Plus.
Preset 1
NOTE: Footswitches A, B, and C on MultiSwitch Plus correspond to
MIDI program changes 1, 2, and 3.
Step on a switch that is not illuminated to recall the
1
corresponding preset.
Step on an illuminated switch to bypass Zelzah.
2
Saving Zelzah presets with MultiSwitch Plus:
1
Dial in the sound that you would like to save as your preset
on Zelzah.
2
Press and hold the ON (4-STAGE) footswitch on Zelzah until
the ON (4-STAGE) LED blinks BLUE.
Press the A, B, or C footswitch on MultiSwitch Plus to save
3
the current state of the pedal to the desired location.
Preset 2
Preset 3
pg 22
Advertisement
Table of Contents
