Spare Parts; Reordering Labels; Wear Parts; Tyres - AS MOTOR AS 940 Sherpa 4WD XL Operator's Manual

Spare parts

The reliable and safe operation of the device also depends
on the quality of the spare parts used. Only use original spare
parts and accessories that were approved by
"AS-Motor Germany". When foreign parts are installed, the
warranty and guarantee shall be void for the foreign part and
for the device and for any resulting damage.
Inform your authorised service centre about the device type
and serial number of your devices when you order spare
parts.

Reordering labels

You can order a set of labels for the control elements under
number G06980017.
To see the order number for the safety signs, look at the
table in chapter "Position of the safety signs on the device".

Wear parts

Some parts are wear parts. They wear during use and must
be replaced. The warranty does not cover the following parts:
Blades, cutting blades, cutter bars, blade bolts, sliding plates,
V-belt, chains, Bowden cables, starter ropes, pressure plates,
air filters, spark plugs, disc springs, lock washers, fuses,
discs, thrust plates, pressure discs, protection skirts, impact
protection, wheels, tires.

Tyres

Warning
If wheels with different diameters are used, damage of the
all-wheel drive system can result. There is a risk of acci-
dent.
Only use the set of tyres authorised by "AS-Motor Ger-
many".
Only the following wheels may be used:
– AS standard tyres (big wheels)
Always mount front and rear tyres in pairs.
For tyre designation, see the Technical data.

Disposal

Dispose of old oil and old fuel in accordance with the local
regulations or return it to your recycling centre.
Packaging, device, and accessories are made of recyclable
materials and must be disposed of accordingly.

Warranty

Please see our AS-Motor website for warranty information.
Please print out the documents that you receive during the
online registration. Keep them together with your sales re-
ceipt.
Spare parts
35