Safety Instructions; Original Spare Parts - AS MOTOR AS 1040 YAK 4WD Adjustment & Maintenance Manual

Introduction

Safety instructions

Safety instructions
Only authorised AS-MOTOR Workshops are allowed to execute the activities
cited in this manual.
Comply with the following instructions and the warnings in the respective
sections, otherwise accidents with severe injuries can occur and/or the device
can be damaged.
Prior to starting work:
 Place the device on a level and non-slip substrate.
 Only use ramps and hoists that are suitable for the device.
 Safeguard the device against rolling off and falling over.
 Let the device cool for at least 20 minutes.
 Close the fuel tap and the tank ventilation.
 Never place the device with petrol in the tank, inside a building where petrol
fumes can come into contact with open fire or sparks.
 Do not inhale fuel fumes, they are harmful.
 Use gloves, particularly for tasks on cutting tools.
 Avoid skin contact with fuel and operating fluids.
 Caution when handling batteries: Battery acid is corrosive. Protect your
hands and eyes from escaping fluid.
 Disconnect the battery via the negative terminal.
 This symbol signals a warning. Failure to comply with the warning can
result in accidents, injuries and damage!
WH AS 1040 YAK 4WD 01/2019 EN
Important note:
ATTENTION WELDING TASKS
Prior to performing welding tasks on the device unplug the plug connector from
the control device (receiver). Always attach the welding device earth very close
to the welding point. Otherwise there is danger of irreparably damaging the
control device.

Original spare parts

Important note:
Only original AS-MOTOR spare parts ensure safety, keep the guarantee intact
and protect against damage. Consequently only use original AS-MOTOR spare
parts; do not use any imitation or counterfeit parts.
Installation of non-original parts invalidates the guarantee claim and the
operating authorisation. Accidents with severe or fatal injuries can be the
result.
All original wear parts, all original blades and many original spare parts bear
the stamped AS-MOTOR logo, as well as the EXXXXX and/or G XXXXXXXX
part numbers.
Page 3 www.as-motor.de