Switching Off And Parking - AS MOTOR AS 940 Sherpa 4WD XL Operator's Manual

Switching off and parking

Warning
Fire hazard
Parts of the device can become extremely hot during oper-
ation and this may cause fire.
► Please observe the safety instruction regarding the fire
risk.
Warning
Danger of poisoning due to poisonous exhaust gases
► Do not operate the engine in closed or insufficiently
ventilated rooms.
► Please observe the safety instruction regarding the
poisoning risk.
Warning
Risk of injury in case of unauthorised use.
► Always remove the ignition key when you do not use
the device.
1. Move the drive lever slowly to neutral position and then to
the left to parking position.
2. Turn the accelerator lever to idle speed.
3. Disengage the blade.
4. Move the lever for the cutting height adjustment to trans-
port position.
5. Turn the ignition key to "ignition off".
6. Wait for the engine to stop completely before you step
away from the device.
7. Pull off the ignition key.
8. Close the fuel valve.
Switching off and parking
25