Hydrostat Transmission - AS MOTOR AS 940 Sherpa 4WD XL Operator's Manual

Terrain mower
Hide thumbs Also See for AS 940 Sherpa 4WD XL:
Table of Contents

Advertisement

Exchanging the battery
Warning
When you work on the battery, there is a risk of short cir-
cuit.
► Do not put any tools or metal objects onto the battery.
► When disconnecting and connecting the battery, ob-
serve the order of assembly steps.
Important: Only use original batteries.
You can buy original batteries from AS-Motor or your author-
ised service centre. Also observe all information in the oper-
ator's manual of the battery (if existing).
Beware! Never confuse the plus and minus terminals.
1. Disconnect the black cable (-).
2. Disconnect the red cable (+).
3. Dismantle the battery from the device.
4. Mount the new battery into the device.
5. Connect the red cable (+).
6. Connect the black cable (-).

Hydrostat transmission

Warning
Risk of injury due to high pressure (up to 5945 psi /
410 bar) in the hydraulic system.
► Check the hydraulic hoses for leaks, damage and chafe
points.
Warning
When oil leaks there is a danger of environmental pollu-
tion.
► Check the hydraulic drive system for leaks before and
after mowing.
Fig. 19:
In warmed up condition, the oil level must be at "MAX" mark-
ing. In cold condition, the oil level must be somewhat below,
in hot condition somewhat above the "MAX" marking.
There always must be oil in the compensation tank so that no
air can enter the hydraulic system.
The oil change must be carried out by an authorized service
centre (see Maintenance table).
Check if the gearbox fan is undamaged.
The hydrostatic drive generates a monotone working noise
that gets louder the more the load is increased (e.g. in steep
terrain). If the working noise changes, if it gets irregular or
very loud, let the hydrostatic drive cool down and check the
oil level.
If the change working noise still exists, have the device
checked by an authorised service centre.
It is possible that the hydraulic system must be ventilated or
the oil must be changed. For refilling, only use the types of oil
specified in the technical data.
Maintenance and cleaning
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents