Moving The Device Without Drive; Disconnecting The Drive; Pushing; Towing - AS MOTOR AS 940 Sherpa 4WD XL Operator's Manual

Moving the device without drive

Moving the device without drive
Warning
The device can roll away without the drive.
► Never unlock the drive in steep terrain without securing
the device against rolling away.

Disconnecting the drive

Notice
When the engine is started while the drive is unlocked, the
hydraulic drive can be destroyed.
► Never start the engine when the drive is unlocked.
To push the device without engine drive, unlock the drive at
the rear of the device and release the parking break. The
device can only be braked via the parking brake.
2
Fig. 16:
1: = Locked
2: = Unlocked (idle speed)
24
3
1

Pushing

Caution
Hot silencer grid.
► Do not touch the silencer grid (3), when you push the
device. It becomes very hot during operation and you
can get burned.
To push the device without engine drive, unlock the drive at
the rear of the device and release the parking break. The
device can only be braked via the parking brake.

Towing

If the engine cannot be started again, the device must be
towed.
1. While using the brakes, let the device roll to terrain that is
less steep.
2. Secure the device against rolling away or sliding.
3. Secure the device with a cable winch that has got enough
load capacity.
4. For towing unlock the drive and release the parking brake.