Control Elements; Front Area; Control Lever At Seat - AS MOTOR AS 940 Sherpa 4WD XL Operator's Manual

Control elements

Front area

1
2
Fig. 10:
Differential lock (1)
You actuate the differential lock with the left foot pedal.
Pedal depressed:
Differential lock on
Pedal not depressed:
Differential lock off
Fuel valve (2)
1: Open
2: Closed
2
1
Brake pedal/parking brake (3)
When you actuate the right foot pedal, the parking brake is
applied. Press the foot pedal only in exceptional situations
because the device stops abruptly.
Brakes:
Release the drive lever and press
the right foot pedal (3) down.

Control lever at seat

4
3
3
Fig. 11:
Blade clutch lever (1)
The engine clutch lever is a guard device. When you disen-
gage the blade, the blade comes to a standstill within5
seconds.
Cutting height adjustment (2)
Seating position (3)
Press the lever (3) to the right, move the seat to the desired
position lock the seat in position.
5 6 8
7
Disengaging blade:
Turn the accelerator lever to MIN.
Move the blade clutch lever back.
Engaging blade:
Pull the lever slowly forward.
The cutting height of the lawn can be
set to 5 positions.
The top position is the transport pos-
ition.
Control elements
2
1
17