System Settings/Preferences - Grandstream Networks GXV3350 Administration Manual

Certificate Management
CA Certificate
Import Trusted CA
Certificates
Trusted CA Certificates
User Certificate
Add Certificate
Custom Certificate
Import Custom
Certificate
Custom Certificate

System Settings/Preferences

LCD & LED Management
Enable Missed Call
Backlight
Enable Missed Call
Indicator
Enable MWI Indicator
Enable New Message
Indicator
Enable Contact Full
Indicator
Enable Indicator When
LCD is Off
Peripherals Interface Management
HDMI Output Control
Allows to upload the CA Certificate file to phone.
Lists trusted CA certificates previously uploaded. Administrator can delete
a certificate from here.
Allows to upload & Install User Certificate file to phone.
Allows to upload a Custom Certificate file to phone.
Lists trusted Custom Certificate previously uploaded. Administrator can
delete a certificate from here.
If set to "Yes", LCD backlight will be turned on when there is a missed call
on the phone. The default setting is "Yes".
Note: Reboot is required for the setting to take effect
If set to "Yes", the LED indicator on the upper right corner of the phone will
light up when there is missed call on the phone.
Default setting is "Yes".
If set to "Yes", the LED indicator on the upper right corner of the phone will
light up when there is new voicemail on the phone. If it set to "No", the LED
indicator will keep off if the phone system receives SIP NOTIFY message
about unread voice mail. The default setting is "Yes".
If set to "Yes", the LED indicator on the upper right corner of the phone will
light up when there is new message on the phone. Default setting is "Yes".
If set to "Yes", the LED indicator on the upper right corner of the phone will
light up when the contact storage or message storage is full. The default
setting is "Yes".
If set to "Yes", the LED indicator on the upper right corner of the phone will
light up when the LCD screen is off. If it set to "No", the LED indicator will
keep off when the LCD screen is off. The default setting is "Yes".
Defines whether to enable HDMI. If enabled, users need to set whether
HDMI would synchronize with LCD. If set to "HDMI Display
Synchronization with LCD", HDMI device will display the same content as
GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 74