Network; Ethernet Settings - Grandstream Networks GXV3350 Administration Manual

- Show received files: Shows the Transfer history of Bluetooth files
- Additional Settings: This menu is available only when the Bluetooth is enabled:
 Device Name. Tap to change the name of the GXV3350, which is displayed on other
Bluetooth devices when discovered. By default, it's "GXV3350_XXXXXX" Where XXXXXX
are the last 6 digits of the phone's MAC address.
 Visibility timeout. Tap to select the timeout interval among "2 minutes", "5 minutes", "1 hour"
or "never". By default, the visibility timeout is 2 minutes.
 Visibility to nearby Bluetooth devices. Sets the visibility of the phone to other Bluetooth
devices. Normally this option is enabled during pairing process so that other Bluetooth devices
can discover the GXV3350.
Available devices: This section will show the available devices for pairing. Tap on
-
scan process on the GXV3350 to discover the Bluetooth devices within the range.

Network

Users can configure Ethernet settings, Wi-Fi, VPN, PPPoE and other advanced network settings here.

Ethernet Settings


Data and VoIP use different networks: Configures whether to set up different networks for the phone
data and the call. If set to "Yes", you need to configure the data network and VoIP network respectively.
Take effect after rebooting.

Preferred Internet Protocol: Selects which Internet protocol to use. When both IPv4 and IPv6 are
enabled, phone attempts to use preferred protocol first and switches to the other choice if it fails.

IPv4 Settings: Here user can configure the IPv4 address type for both data and VoIP calls. For
network configuration of data, if DHCP is selected, the phone will get an IP address automatically from
the DHCP server in the network. This is the default mode. If Static IP is selected, manually enter the
information for IP Address, Subnet Mask, Default Gateway, DNS Server and Alternative DNS server. If
PPPoE is selected, type PPPoE Account ID and PPPoE Password provided from the PPPoE server to
get authenticated for network access. For network configuration of VoIP calls, if DHCP is selected, the
phone will get an IP address automatically from the DHCP server in the network. This is the default
mode. If Static IP is selected, manually enter the information for IP Address, Subnet Mask, Default
Gateway, DNS Server and Alternative DNS server.
GXV3350 Administration Guide
Version 1.0.3.27
to initiate
P a g e | 26