Account/Call Settings - Grandstream Networks GXV3350 Administration Manual

Account/Call Settings

Call Features
Enable Video Call
Start Video
Automatically
Remote Video Request
Video Layout
Auto Answer
Custom Alert-Info for
Auto Answer
Play Warning Tone for
Auto Answer Intercom
Intercom Barging
Configures the video call function for this account. If set to "Default", it will
be configured according to global video call function.
Permits the phone system to enable the video feature automatically when
it makes an outbound call.
If set to "Yes", the video codec attributes will be included in the SIP INVITE
message. Or the attributes will not be included.
The default setting is "Yes".
Configures the preference to handle video request from the remote party
during an audio call. The default is "Prompt".
 "Prompt": A message will be prompted if a video request is received.
Users can select "Yes" to establish video or "No" to reject the request.
 "Accept": Video request will be accepted automatically, and video will be
established.
 "Deny": Video request will be rejected automatically.
Defines whether to enter full screen when incoming video call is answered.

"Fullscreen": GXV3350 will show the remote video feed in full screen.

"Only display Remote Screen": GXV3350 only displays the remote
screen in full screen mode.

"Default": GXV3350 will show both remote and local video feed.
Sets the phone system to allow to answer an incoming call automatically
when idle. If it is set to "Yes", the phone will automatically enable the
speaker phone to answer all the incoming calls after a short reminding
beep. If set to "Enable Intercom/Paging", it will automatically answer the
incoming calls whose SIP INVITE includes auto-answer tag in the info
header. The default setting is "No".
Configures the Alert-Info content. Only when the info or the parameter in
Alert-Info header matches this content would the phone answer the paging
call automatically. If set to blank, all paging calls will be answered
automatically.
When this option is enabled, the phone will play a warning tone When auto-
answering intercom. The default setting is "Yes".
Configures whether to answer the incoming intercom call when there is
already an active call on the phone. When" Intercom Barging" is enabled,
and if the current active call is an intercom call, the incoming intercom call
will be automatically rejected; otherwise if the current active call is not an
intercom call, the current active call will be put on hold and the incoming
intercom will be automatically answered. When "Intercom Barging" is
GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 50