Phone Settings Page Definitions; Phone Settings/General Settings - Grandstream Networks GXV3350 Administration Manual

SCA
Enable SCA (Shared Call
Appearance)
Enable Barge-in
Auto-filling CallPark
Feature Code
CallPark Feature Code
Line Seize Timeout (s)

Phone Settings Page Definitions

Phone Settings/General Settings

Basic Settings
Local RTP Port
Enables/disables the Shared Call Appearance (the Broadsoft Standard)
feature for this account. If it is set to "Yes", the phone system can update
and share account status with another device. The default setting is "No".
Enables/disables the Barge-In feature. If it is set to "Yes", the user could
tap the SCA account to barge into an active session with another shared
line. The default setting is "No".
If it is set to "Yes", the configured "Call Park Service Code" will be
automatically filled in on the phone's dial pad when picking up the parked
call. This option will be active only if "Special Mode" is set to "Broadsoft"
and "Enable SCA" is set to "Yes". The default setting is "Yes".
Configures the pickup feature code for call park. If " Auto-filling CallPark
Feature Code " is set to "Yes", this call park service code will be
automatically filled in on the phone's dial pad when picking up the parked
call. This is used when "Special Mode" is set to "BroadSoft" (from web UI
or provisioning) and "Enable SCA" is set to "Yes"
Defines line-seize expiration timer. For Shared Call Appearance, the
phone must send a SUBSCRIBE request for the line-seize event package
whenever a user attempts to take the shared line off hook. The default
value is 15 seconds. The valid range is from 15 to 60.
Defines the local RTP-RTCP port pair used to listen and transmit.
The following rule is applied:
N>=0, the default value of Port_Value is 5004.
- Audio RTP port: Port_Value+10*N
- Audio RTCP port: Port_Value+10*N+1
- Video RTP port: Port_Value+10*N+2
- Video RTCP port: Port_Value+10*N+3
- FEC RTP port: Port_Value+10*N+4
- FEC RTCP port: Port_Value+10*N+5
- BFCP Protocol port: Port_Value+10*N+6
- BFCP RTP port: Port_Value+10*N+8
- BFCP RTCP port: Port_Value+10*N+9
The default value is 50040. The valid range is from 50040 to 65000.
Note: Only when the video FEC mode is set to 1, is the FEC RTP port
used.
GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 58