Connecting The Gxv3350; Gbx20 Extension Module; Figure 3: Tab On The Handset Cradle; Figure 4: Gxv3350 Back / Side View - Grandstream Networks GXV3350 Administration Manual

Connecting the GXV3350

To setup your GXV3350, please follow the steps below:
1. Connect the handset and main phone case with the phone cord;
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
3. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 2, this step could be skipped;
4. The LCD will display booting up or firmware upgrading information. Before continuing, please wait
for the main screen display to show up;
5. Using the web configuration interface or from the menu of the touch screen, you can further
configure network connection using static IP, DHCP etc.

GBX20 Extension Module

The GXV3350 uses GBX20 as the extension module. The extension module is an ideal solution for the
busy enterprise environment looking to add the ability to receive and dispatch calls efficiently. Each GBX20
extension module has 20 programmable buttons, Left and Right buttons, supporting 40 Multiple Purpose
Keys to be configured. GXV3350 supports up to 4 extension modules, adding 160 fully programmable
phone extensions to the phone.

Figure 3: Tab on The Handset Cradle

Figure 4: GXV3350 Back / Side View

GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 20