Grandstream Networks GXV3350 Administration Manual page 85

from the device's LCD.
Programmable key
Format
Display Format
Show Display Name
from Server
BLF
Key Mode
Configures the display format for the MPK. Users could select "Name",
"User ID" or "Name(User ID)". "Name" is the one saved in phone contacts.
The default setting is "Name, User ID, Key mode".
If selected, the display name on the server will replace the name users
configured.
The key modes are:

Speed Dial: Press to dial the User ID when the accounts being
configured as VPK.

Busy Lamp Field: Monitor the User ID status when the accounts
being configured as VPK.

Call Transfer: Transfer the current active call to User ID when the
accounts being configured as VPK.

Call Intercom: Intercom/paging to the User ID when the accounts
being configured as VPK.

Speed Dial via Active Account: Similar to Speed Dial but it will dial
based on the current active account. For example, if the phone is
offhook and account 2 is active, it will call the User ID when the
accounts being configured as VPK.

Dial DTMF: Dial the DTMF digits of the User ID when the accounts
being configured as VPK during the call.

Call Park: Configure the call park feature code to park or retrieve the
call.

Multicast Paging: For multicast sending, please fill in the display
name in the Settings and fill in the sending address in the multicast
address.

Speed Conference: Quickly dial up multiple numbers to set up a
meeting.

Dial Prefix: After configured, once pressed this key, all numbers use
GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 85