Grandstream Networks GXV3350 Administration Manual page 62

Auto Unhold When
Press the Line Key
Virtual Account Group
Avaya Mode
Number of Accounts The
Virtual Account Group
Register
Filter Characters
Escape # as %23 in SIP
URI
Default Phone APP
Quickly Launch
Specified APP
Record Mode
handset.
Default setting is "Auto".
Configures when there are multiple lines, whether to UnHold the line
automatically when click the line being held and hold the line in the primary
call. Note: the hold situation which is set manually will not be put on hold
automatically. The default setting is "No".
If set to "Yes", when processing SIP Register 3XX Response, it will parse
the address site in 3XX, modify the account server info "SIP Server: port"
& "SIP Transaction" in virtual account group and initiate registration again.
This feature is designed for the Avaya customers.
Configures the number of concurrent the main server and standby server
register, each account supports 1 SIP main server and 4 standby server
registration.
Sets the characters for filter when dial out numbers. Users could set up
multiple characters. For example, if set to "[()-]", when dial (0571)-8800-
8888, the character "()-" will be automatically filtered and dial
057188008888 directly.
Determines which characters will be included in the SIP INVITE URI if end
users input #. If it is set to "Yes", the phone system will replace the #
by %23. Otherwise, it will include # in the SIP INVITE message.
The default setting is "Yes".
Configures phone APP for the device. The default setting is Phone of
Grandstream, but if you develops a new phone application using SDK,
you can choose the new one to replace the original. The configuration of
"Quickly Launch 3rd Party APP" is not available if the default phone
application changes.
Selects the specified application that launch quickly by offhook/clicking
the Dial or Conference. Once selected, the package name and activity of
specified application will be displayed below. When user offhooks / click
the Dial or Conference application, it will automatically enter the
configured application interface. The default setting is blank, which means
using GS phone application.
Configures phone recording mode.

If set to "Record locally", then the phone will use the local tape
recorder for call recording, and the audio file will be saved in
accordance with the tape recorder setup.

If set to "Record on PortaOne", then will send the specified SIP
messages to the corresponding server.

If set to "Record on UCM", then will send the recording feature code
GXV3350 Administration Guide
Version 1.0.3.27
P a g e | 62