Phone Setup; Wall Mount; Desktop Installation; Power On The Phone - Grandstream Networks GHP630/W Quick Installation Manual

GHP630/W & GHP631/W DESCRIPTION
Front panel
Flash
Speaker
Volume Down Key
Message
Note: The LED for the message waiting indicator will flash in green when
there is a message waiting.
Back panel
Power
LAN Port
Password
Message Waiting
Indicator
LCD screen
Softkeys
Alphanumeric
Keypad
Redial
Hold
Volume Up Key
Mute
Mute Indicator
USB Type-C
Port
Wall Mount Stand
Slots
Handset Port
~ 3 ~

PHONE SETUP

Wall Mount

1. On the wall where the GHP630/W & GHP631/W will be mounted, mark two
dots with 100mm distance in between vertically.
2. Using a drill, make a hole on each marked dot. Put a plastic expansion bolt
and screw (not provided) into each hole. Leave enough space on the screws
to mount the GHP630/W & GHP631/W.
3. Attach the wall mount spacers to the slot for wall mount spacers on the back
of the phone.
4. Mount the GHP630/W & GHP631/W on the screws using its "Wall Mount
Slots".

Desktop Installation

For installing the phone on the table with the phone stand, attach the phone
stand to the bottom of the phone where there is a slot for the phone stand.

Power on the Phone

To power on the GHP630/W & GHP631/W:
1. For GHP630W & GHP631W: Connect the 12V DC output plug to the
power jack on the phone; plug the power adapter into an electrical outlet.
2. For GHP630 & GHP631: A PoE switch can be used to power up the
device without the need of the 12V power adapter.
1
Wall
Desktop
2
~ 4 ~
100 mm