Preliminary Operations; Changing The Water; Cup Heater - Astoria futura +4U User Manual

8

Preliminary operations

8.1 Changing the water

In case of breaks longer than 1 week, it is neces-
sary to perform the changing of the 100% of the
water contained in the hydraulic circuits of the
machine, by using the appropriate dispensing
points, as described in the Paragraph 5.4 "Installa-
tion report".

8.2 Cup heater

Place the cups to be heated on the appropriate
surface (1).
To turn on the cup heater, press the ( ) naviga-
tor key; an asterisk will appear on the first line of the
display to the far right of the display, indicating that
the cup heater is ON.
To turn it off, press the ( ) navigator key again,
the asterisk will disappear.
To change the temperature of the cup heater,
proceed as described in chapter 13.4.
16
15
User manual
1
!
For safety reasons, it is advisable not to place
cloths or other objects on the cup heater sur-
face (1).
i
When the red indicator light (16) goes off,
this indicates that the cup heater is at the
programmed temperature.
i
To change the temperature of the cup heater,
proceed as described in chapter 13.
39