Table of Contents
Advertisement
SPECIFICATION & DESCRIPTION
CHANGES
All pictures, descriptions, and specifications found in this
instruction manual are subject to change without notice.
Hobbico maintains no responsibility for inadvertent errors in
this manual.
For the latest technical updates or manual corrections for
the ElectriStar EP Select, visit the Hobbico web site listed
below and select the Hobbico ElectriStar EP Select. A "Tech
Notice" box will appear in the upper left corner of the page if
there is new technical information or changes to this kit.
http://www.hobbico.com/airplanes/index.html
PROTECT YOUR MODEL, YOURSELF
& OTHERS...FOLLOW THESE
IMPORTANT SAFETY PRECAUTIONS
•
Your ElectriStar EP Select should not be considered a toy,
but rather a sophisticated, working model that functions very
much like a full-size airplane. Because of its performance
capabilities, the ElectriStar EP Select, if not assembled
correctly, could cause injury to yourself, spectators, and/or
damage to property.
•
You must assemble the model according to the
instructions. Do not alter or modify the model, as doing so may
result in an unsafe or unflyable model. In a few cases the
instructions may differ slightly from the photos. In those
instances the written instructions should be considered correct.
•
You must check the operation of the model before every
flight to insure that all equipment is operating and that the
model has remained structurally sound. Be sure to check
linkage connections and electrical connections often and
replace them if they show any signs of wear or fatigue.
•
If you are not already an experienced R/C pilot, you
should fly the model only with the help of a competent,
experienced R/C pilot.
We, as kit manufacturer, provide you with a top quality kit
and instructions, but ultimately the quality and flyability of
your finished model depends on how well you built it;
therefore, we cannot in any way guarantee the
performance
of
your
representations are expressed or implied as to the
performance or safety of your completed model.
completed
model
and
•
Before starting to build, inspect the parts in this kit to
make sure that they are of acceptable quality. If any parts
are not of acceptable quality, or if you need assistance with
assembly, contact:
Hobbico Product Support
Phone: (217) 398-8970, Ext 5
E-Mail: airsupport@hobbico.com
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return this
kit in new and unused condition to the place of purchase.
ADDITIONAL ITEMS REQUIRED
Hardware & Accessories
The following is a list of accessories required to make the
ElectriStar EP Select operational. Order numbers are
in parentheses.
❏
(2) 7-Cell 8.4V 3000mAh NiMH (Nickel-Metal Hydride)
battery packs (GPMP0355)
❏
Hobbico Dual Peak NiMH charger (HCAP0255 – Optional)
If you prefer to use Lithium-Polymer (LiPo) batteries, you will
need the following items:
❏
(2) 7.4V 3200mAh 20C Discharge battery with
balance (GPMP0632)
❏
PolyCharge
™
LiPo DC charger (GPMM3010)
Adhesives & Building Supplies
In addition to common household tools, this is the "very short
list" of the most important items required to finish the
ElectriStar EP Select.
❏
1 oz. [28g] Thin Pro
Optional Supplies & Tools
Here is a list of optional tools mentioned in the manual that will
help you prepare the ElectriStar EP Select for flight.
no
❏
CG Machine
™
❏
Precision Magnetic Propeller Balancer
❏
Stick-on segmented lead weights (GPMQ4485)
3
Fax: (217) 398-7721
™
CA adhesive (GPMR6002)
(GPMR2400)
™
(TOPQ5700)
Hide quick links:
Advertisement
Table of Contents
