Throttle Friction Adjuster - Yamaha F200 Owner's Manual

Components
2
22.5
3
1
1. Fully open
2. Fully closed
3. Free accelerator
F
2
22.5
3
1
1. Fully open
2. Fully closed
3. Free accelerator
 The free throttle switch can only be used
when the control lever is in the neutral po-
sition.
31
N
ZMU05881
N
ZMU05882
N
ZMU05883
 During operation the digital electronic con-
trol-active indicator changes from continu-
ously lit to blinking. When the indicator
starts blinking, the throttle begins to open
after the control lever is moved at least
22.5°.
 After using the free throttle switch, return
the control lever to the neutral position. The
free throttle switch will return automatically
to its set position. The digital electronic
control-active indicator will change from
blinking to continuously lit and the digital
electronic control will then engage forward
and reverse normally.
EMU35252

Throttle friction adjuster

A friction device provides adjustable resis-
tance to movement of the control lever, and
can be set according to operator preference.
To increase resistance, turn the adjuster
clockwise. To decrease resistance, turn the
adjuster counterclockwise.
EWM01771
WARNING
 If the friction is too small, the control le-
ver could move freely and cause an ac-
cident.
 Do not overtighten the friction adjuster.
If there is too much resistance, it could
be difficult to move the control lever,
which could result in an accident.
ZMU05820