How To Enter Bios - Inspur NF5280M5 Security Configuration Manual

Inspur server security configuration Guide
Figure 2.2 location of CMOS jumper on main board
(Note: the system time will be reset if the CMOS battery is removed, so
the jumper mode is recommended.)
You can also restore the BIOS function through 'load default' option.
When BIOS cannot be started normally due to BIOS configuration error,
an error prompt window will pop up on the screen during BIOS startup,
indicating that you can restore BIOS function by clicking 'load default'
option.

2.1.1 How to enter BIOS

Power on and start the server. When the logo screen is displayed, the
bottom of the screen will prompt 'press <del> to setup or <tab> to post or
<F11> to boot menu or <F12> to PXE boot'. Press the <del> key quickly,
and the system will enter the BIOS setting interface.
If the above operations do not enter the setting interface, press <Ctrl> +
15 / 42