Inspur server security configuration Guide
Figure 2.8.
① Sharelink Network
This is used to enable/disable the shared network. If enable is selected, the
public network interface of the server can access the server and BMC at
the same time. If this item is disabled, the public network interface of the
server can only be used to access the server. For your data security, it is
recommended that you do not connect the BMC to the Internet.
If you select 'Enable Sharelink Network', you can set the parameters of
BMC sharelink (public network interface) in 'BMC Sharelink
Management Channel'. 'Get BMC Sharelink Parameters' has three options:
'Do nothing', 'Auto' and 'Manual'.
Do nothing: to use the last configuration without change.
21 / 42