Inspur server security configuration Guide
Figure 1.2 putty interface
Press the switch button on the front control panel of the server, the fan runs,
and the system starts self-test.
1.4
Power off
There are two ways to shut down the server system:
1. The server can be shut down through the operation under the operating
system;
2. The server can be shut down by manually long pressing the switch button
on the front control panel.
After the above two ways of operation, although the server is no longer
running, some voltages are still available. At this time, the system can be
powered on through remote management. To achieve a complete shutdown,
you need to disconnect the AC power supply of the system (that is, unplug
11 / 42