Projector; Cleaning The Screen - Sega VIRTUA COP Owner's Manual

11.

PROJECTOR

Since the Projector has been adjusted at the time of shipment, avoid making
further adjustments without good reason.
CAUTION!
STOP
The Projector is subject to color deviation due to Convergence deviation caused
by the geomagnetism at the installation location and peripheral magnetic field.
IMPORTANT!
After the installation of machine, and before commencing operation, check for
Convergence deviation and if deviated, make adjustments.
Projector adjustments are stored. Due to distortion or color deviation in the TEST mode, if an
adjustment is necessary, use the Remote Control to make adjustments.

11-1 CLEANING THE SCREEN

Since the Projector screen is susceptible to damage, pay careful attention to its
handling. When cleaning, refrain from using water or volatile chemicals.
When the screen surface becomes
dirty with dust, etc., clean it by using
a soft cloth such as gauze. When
water, and volatile chemicals such
as benzine, thinner, etc., spill on the
screen surface, it may be subject
to damage, therefore, do not use
them. Also, since the surfaces are
susceptible to damage, refrain from
rubbing them with a hard material or
using a duster.
79
FIG. 11. 1
www.seuservice.com