Projector; Cleaning The Screen - Sega THE HOUSE OF THE DEAD III DELUXE Operator's Manual

9.

PROJECTOR

Since the Projector has been adjusted at the time of shipment, avoid making
further adjustments without good reason.
CAUTION!
The Projector is subject to color deviation due to Convergence deviation caused
STOP
by the geomagnetism at the installation location and peripheral magnetic field.
After the installation of machine, and before commencing operation, check for
IMPORTANT!
Convergence deviation and if deviated, make adjustments.
Projector adjustments are stored. Due to distortion or color deviation in the TEST mode, if an
adjustment is necessary, use the Remote Control to make adjustments.

9 - 1 CLEANING THE SCREEN

Since the Projector screen is susceptible to damage, pay careful attention to its
handling. When cleaning, refrain from using water or volatile chemicals.
CAUTION!
When the screen surface
becomes dirty with dust,
etc., clean it by using a
soft cloth such as gauze.
When water, and volatile
chemicals such as benzine,
thinner, etc., spill on the
screen surface, it may be
subject to damage, therefore,
do not use them. Also, since
the surfaces are susceptible
to damage, refrain from
rubbing them with a hard
material or using a duster.
www.seuservice.com
*NOTE: Picture may differ from actual unit.
FIG. 11. 1
68