Table of Contents
Advertisement
11.
PROJECTOR
Since the Projector has been adjusted at the time of shipment, avoid making further
adjustments without good reason.
WARNING!
The Projector is subject to color deviation due to Convergence deviation caused
STOP
by the geomagnetism at the installation location and peripheral magnetic field.
After the installation of machine, and before commencing operation, check for
IMPORTANT!
Convergence deviation and if deviated, make adjustments.
Projector adjustments are stored. Due to distortion or color deviation in the TEST mode, if an
adjustment is necessary, use the Remote Control to make adjustments.
11 - 1 CLEANING THE SCREEN
Since the Projector screen is susceptible to damage, pay careful attention to its
handling. When cleaning, refrain from using water or volatile chemicals.
CAUTION!
When the screen surface
becomes dirty with dust, etc.,
clean it by using a soft cloth
such as gauze. When water,
and volatile chemicals such as
benzine, thinner, etc., spill on the
screen surface, it may be subject
to damage, therefore, do not use
them. Also, since the surfaces
are susceptible to damage,
refrain from rubbing them with a
hard material or using a duster.
FIG. 11. 1
91
www.seuservice.com
Advertisement
Table of Contents
