Voltage Sensing Module; Dc/Dc Converter; Sitop Select; Sirius Safety Relay - Siemens SINAMICS GL150 Operating Instructions Manual

Further information is available in the following documents:
● You will find information on the wiring in the circuit manual in the "Technical specifications
● You can find information on the interfaces and LEDs in the "Supplementary component
3.4.7.4

Voltage Sensing Module

The VSM10 Voltage Sensing Module measures the actual line voltage values. The connections
are wired internally to the customer terminal block.
3.4.7.5

DC/DC converter

DC/DC converters are used to provide a stable and reliable 24 V power supply for the TM15/
TM31 terminal module, the circuit breaker, and the SIMATIC S7 (optional).
3.4.7.6

SITOP Select

The SITOP Select is used to monitor and distribute the load current of the 24 V DC power
supply. The SITOP Select has four independent output channels. The output current of each
channel can be adjusted from between 3 A and 10 A.
Each channel has its own status signal.
● Channel 1 monitors the power supply for the SINAMICS modules.
● Channels 2 and 3 monitor the 24 V DC power supply in the power unit.
● Channel 4 is used to supply the customer terminals and the circuit breaker.
3.4.7.7

Sirius safety relay

The safety relay monitors the status of the Emergency Off circuit, and is used to implement a
safety-related shutdown when dangerous conditions occur. LEDs indicate the operating state
and the function.
3.5

Options

3.5.1

Triggering additional circuit breakers (option A04)

Additional circuit breakers can be controlled via TM31 and TM15.
SINAMICS GL150 6SL38555UN113KA0Z
Operating Instructions Rev.201910281450 EXAMPLE
and drawings" appendix.
descriptions" document.
Description
3.5 Options
49