Contrast; Resolution; Advanced Sending Operations; Overseas Mode - Brother IntelliFAX 1270E Owner's Manual

Contrast

If your original is very light or very dark, you might want to set the contrast accordingly.
Use S.LIGHT
1
Place the original face down in the ADF.
2
Press Menu/Set, 3, 3.
3
or
Press to select AUTO,
4
Press 2 if you are finished choosing settings, and go to Step 5—OR—Press 1 if you
want to select additional settings. The display returns to the Setup Send menu.
5
Enter a fax number, and then press Fax Start to send a fax—OR—Press Copy to
make a copy.

Resolution

When you have an original in the ADF, you can use the Resolution key. Press
Resolution continuously until you see your selection on the LCD.
STANDARD
FINE
S. FINE
PHOTO

Advanced Sending Operations

Overseas Mode

If you have difficulty sending a fax overseas, use the Overseas mode.
After you send a fax using this feature, the feature turns itself off.
1
Place the original face down in the ADF.
2
Press Menu/Set, 3, 5.
3
or
Press to select
4
Press if you want to select additional settings. The LCD returns to the Setup Send
1
menu—OR—Press 2 if you are finished choosing settings, and then go to Step 5.
5
Enter the fax number you're calling.
6
Press Fax Start.
6 - 6
S E T U P S E N D
to send a very light original. Use
S.LIGHT
suitable for most typed originals
good for small print; transmits a little slower than standard resolution
good for small print or artwork; transmits slower than fine resolution
use when original has varying shades of gray; slowest
transmission time
ON (or OFF), and then press Menu/Set.
S.DARK to send a very dark original.
or S.DARK, and then press Menu/Set.