Memory Storage; Setting Tone/Pulse Dialing Mode; Setting Up Your Area Code (Usa Only) - Brother IntelliFAX 1270E Owner's Manual

Memory Storage

In the event of a power failure, all settings in the
RECEIVE and
COVERPAGE MSG
may have to reset the date and time.

Setting Tone/Pulse Dialing Mode

Your fax machine comes set to accommodate Tone (multi-frequency) dialing service.
If you have Pulse (rotary) dialing service, you need to change the dialing mode.
1
Press Menu/Set, 1, 5.
2
or
Press to select
and then press Menu/Set.
3
Press Stop/Exit.

Setting Up Your Area Code (USA Only)

If you must dial the area code to call within your area code, do not enter this setting.
1
Press Menu/Set, 0, 2.
2
Use the dial pad to enter your area code,
and then press Menu/Set.
3
Press Stop/Exit.
4 - 6
I N I T I A L S E T U P
SET AUTO DIAL plus the
(from SETUP
TONE or PULSE,
INITIAL
COVERPG SETUP
SEND) operations are stored permanently. You
SETUP, SETUP
and