Setup Send; Before You Begin; Automatic Document Feeder (Adf) - Brother IntelliFAX 1270E Owner's Manual

Brother intellifax 1270e: users manual
Hide thumbs Also See for IntelliFAX 1270E:
Table of Contents

Advertisement

6

Setup Send

Before You Begin

Before you begin sending faxes, make sure you read all the instructions and cautions
for placing originals in the automatic document feeder.

Automatic Document Feeder (ADF)

I
Originals must be between 5.8 and 8.5 inches wide and between 5.9 and 23.7 inches
long. Your fax machine can scan an image only 8.2 inches wide, regardless of the
paper width.
I
Make sure you place the original face down, top edge first in the ADF.
I
Adjust the paper guides to fit the width of your original.
Paper guides
I
The ADF can hold up to 20 pages (17lb -20 lb), feeding each one individually through
the fax machine. Use standard (17 lb –24 lb) paper when using the ADF; if you're
using heavier paper, feed each sheet individually to prevent paper jams.
DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric.
I
Make sure originals written with ink are completely dry.
You should press Resolution (before you send the fax) to select the resolution for
the type of original you're sending. (See Resolution, page 6-6.)
S E T U P S E N D
6 - 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-1270e

Table of Contents