Setting Volume Amplify
Please carefully read Choosing the Handset Volume (For Volume Amplify), page 4-4
before you do the following steps:
1
Press Menu/Set, 1, 4.
2
or
Press
to select
none of the users are hearing-impaired and go to
Step 4—OR—If some or all of the users are hearing-
impaired, select
VOL AMPLIFY:ON?
3
or
Press
to select
are hearing-impaired—OR—Select
TEMPORARY?
hearing-impaired.
4
Press Menu/Set.
5
Press Stop/Exit.
Setting the Ring Volume
You can adjust the ring volume when your fax machine is idle. You can select a ring
volume level or press until the ring is off.
or
Press
to adjust the volume level. With each key press, the fax machine rings so
you can hear the current setting and the LCD shows the setting you are choosing. Each
key press changes the volume to the next setting. The new setting will remain until you
change it again.
Setting Beeper Volume
You can set the beeper to LOW,
the beeper is set to
or make an error, and at the end of fax sending or receiving.
1
Press Menu/Set, 1, 3.
2
or
Press
to select your setting, and then press Menu/Set.
3
Press Stop/Exit.
VOL AMPLIFY:OFF?
PERMANENT?
if all the users
if only some of the users are
HIGH
LOW
or HIGH, the fax machine beeps every time you press a key
if
and then press Menu/Set.
or OFF. The default setting is LOW. When
I N I T I A L S E T U P
4 - 5