Setting The Lcd Contrast - Brother FAX-1360 Quick Setup Manual

Setting Up the Machine
3
Check the quality of the block on the sheet.
Check that the dotted lines are all visible with no gaps. If OK select (Yes) at the control panel.
If gaps are visible select (No) at the control panel to start the cleaning process and follow the prompts at the LCD.
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
1.Yes 2.No
5
Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 6.
OK
6
The LCD shows:
Start Cleaning?
1.Yes 2.No
7
Press 1 (Yes), the machine will then start
cleaning.
8
After cleaning is finished, press Start. The
machine starts printing the Print Quality Check
Sheet again and goes back to step 3.
8
q
Poor
q
9

Setting the LCD contrast

You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty seeing
the LCD from your position, we recommend changing
the contrast setting for improved viewing.
1
Press Menu.
2
Press 1.
3
Press 5.
4
Press a or b to choose Dark or Light.
5
Press OK.
6
Press Stop/Exit.
Contrast:Light
Contrast:Dark