Table of Contents
Advertisement
Setting the Ring Volume
You can adjust the ring volume when your machine is idle. You can turn
the ring OFF.
Press
or
to adjust the volume level. With each key press, the
machine rings so you can hear the current setting and the display shows
the setting you are choosing.
Each key press changes the volume to the next setting.
The new setting will remain until you change it again.
Memory Storage
Your machine is equipped with an internal battery that will keep the date
and time information for up to about 12 hours (FAX-8250P), about 9
hours (FAX-8650P) after power has been cut off. After that time, the date
and time will be lost and you will have to re-enter the information. In the
event of a power failure, all settings in the INITIAL SETUP, SETUP
RECEIVE, SET QUICK-DIAL and REMOTE FAX OPT, plus the
COVERPG SETUP and COVERPAGE NOTE (from SETUP SEND)
functions are stored permanently.
Memory Security
This feature allows you to prevent unauthorised access to the fax
machine. When switched ON, Memory Security prohibits most
functions. The following functions listed are available while Memory
Security is switched ON.
Receiving faxes into memory [limited by Memory Capacity].
Scheduled Delayed Transmission*
Polling*
Fax Forwarding*
Remote Retrieval
* Provided it was set before Memory Security was switched ON.
I N I T I A L S E T U P
35
Advertisement
Table of Contents
