Muratec F-110 Operating Instructions Manual page 52

All manuals and user guides at all-guides.com
6. When setting is done, press START/ENTER to save the setting.
You can exit from setup mode at any time by pressing STOP. The
machine returns to Standby mode without saving the setting you
have already changed.
Selectable Options
These instructions assume you have followed the steps on
under 'Setting an Option' and the machine is prompting you to change
one of the options listed here.
• LANGUAGE — You can select the display language. The available
languages are ENGLISH, GERMAN, FRENCH, ITALIAN, SPANISH,
PORTUGUESE and DUTCH.
• SEND FROM MEMORY—Enables all transmission documents to be
automatically scanned into the memory before transmission.
Select ON to enable.
Select OFF to disable.
• SENDING CONFIRM — A confirmation report shows whether the last
transmission was successful or not, how many pages were sent, etc.
Select ERROR to print only when an error occurs and the transmission
was not successful.
Select ON to print a confirmation report automatically each time you
send a fax.
Select OFF to turn off.
• FAX PAPER SIZE — Select the paper size you will use for recording.
LETTER, A4 and LEGAL sizes are available.
Note: If you set the Auto Reduction menu option, your machine will
determine the reduction rate according to this setting.
• TONER SAVER MODE — You can preserve the toner supply with this
mode.
Select ON to turn this feature on. The machine prints documents using
less toner. The print quality may be reduced.
Select OFF to turn this feature off.
page 3.2
3.3
Stand-alone Fax