Installing The Muratec Software - Muratec F-110 Operating Instructions Manual

All manuals and user guides at all-guides.com

Installing the Muratec Software

Note: For Windows 95/98/Me/NT 4.0/2000/XP users, close "New
Hardware Found" screen when the computer boots up.
1. Insert the supplied CD-ROM into your CD-ROM drive.
The SmarThru CD-ROM is automatically running and the opening
window appears.
If the opening window does not appear, click Start, and then select
Run. Type X:Autorun.exe, replacing "X" with the letter of your drive,
and click OK.
2. Click Install the Muratec Software on your PC.
3. Follow the on-screen instructions and click Next.
Installing Muratec Software
2.3