Connecting To The Phone Line - Muratec F-110 Operating Instructions Manual

4. Attach the handset cradle to the main body.
Notes:
• If you want to remove the cradle, while pushing up the part A , on

Connecting to the Phone Line

For proper operation, the F-110 must be connected to the wall jack.
Once you have decided which wall jack you will be using, check a box
below and follow the instructions.
1.12
Getting Started
All manuals and user guides at all-guides.com
Insert the two tabs of the cradle into the slots on the left side of the
machine as shown, and while pressing part A on the bottom of the
cradle, push the cradle toward the machine until it clicks into place.
the bottom of the cradle, slide the cradle down, then take it out.
I only have one phone line coming to this wall jack. (This
includes two phone numbers on one line with distinctive ring service.)
Go to "To Connect to a Wall Jack that has Only One Phone Line" on
next page.
I have two phone lines coming to this wall jack. Go to "You have
two phone lines coming into one wall jack" on page A.2.