Plugging In The Power; Loading Paper - Muratec F-110 Operating Instructions Manual

All manuals and user guides at all-guides.com

Plugging In the Power

Plug one end of the cord into the back of the machine and the other end
into a standard AC power outlet.
The F-110 will turn on and the display will read 'SYSTEM INITIAL'. If
there is no paper loaded, the displays will show 'NO PAPER.' then if there
is no cartridge installed, the display will show 'JAM/NO CARTRIDGE'.
To AC outlet
To turn off, unplug the power cord.

Loading Paper

For the best results, use high quality xerographic paper. The automatic
paper input tray can hold a maximum of 150 sheets of plain paper. The
maximum capacity may be less, depending on the paper thickness.
Note: For stand-alone copy and fax operations, the F-110 product
supports A4, letter, and legal paper. After loading paper, make
sure that you select the correct paper size. For more information
on setting the paper size, see 'Setting User-Selectable System
Options' on page
1. Pull the paper input support completely out of the unit.
Paper input support
3.2.
Automatic paper
input tray
Manual paper
input tray
1.15
Getting Started