Priority Fax - Muratec F-110 Operating Instructions Manual

Priority Fax

When the priority fax is enabled, a high priority document can be
transmitted ahead of reserved operations. The document is scanned into
the memory, then transmitted when the current operation is concluded.
In addition, a priority transmission will interrupt a broadcast operation
between stations (i.e., when transmission to station A ends, before
transmission to station B begins) or between redial attempts.
1. Load the document face down. If necessary, adjust Resolution, or
2. Press ADVANCED FAX on the front panel. The display shows the first
3. Press ➛ or ❿ until 'PRIORITY FAX' appears, then press
4. Enter the number of the remote machine using the ten number
5. Press START/ENTER to confirm the number. The display asks you to
6. If you want to assign a name to the transmission, enter the name.
7. Press START/ENTER. The document will be scanned into memory.
8. The machine shows the number being dialled, then begins
3.32
Stand-alone Fax
All manuals and user guides at all-guides.com
Contrast. For details, see
menu; BROADCASTING.
START/ENTER to access the Priority Fax menu.
keypad.
You can also press a one-touch button. If not, press SPEED(#), enter
a 2-digit speed dial number, then press START/ENTER. The stored
number appears on the display.
enter a name.
If not, skip over this step.
For details on how to enter a name using the number keypad,
see page 3.20.
The display shows the memory capacity and the number of pages
being stored.
transmitting the document.
page 3.9.