Using Advanced Copy Features - Muratec F-110 Operating Instructions Manual

All manuals and user guides at all-guides.com

Using Advanced Copy Features

You can adjust the quantity, size, and print order for copying. Take the
following steps:
1. Load your document face down with the top edge first going into the
document feeder. If necessary, press RECEIVE MODE/CONTRAST to
change the contrast. For details on the Contrast, see
2. Press COPY. The display asks you to enter the copy quantity
(1 to 99).
3. If you need two or more copies, enter the desired number and press
START/ENTER.
4. If you want to reduce or expand the image size, enter the number of
the desired zoom rate, then press START/ENTER.
5. The display asks you to set the COLLATE COPY menu. Press ➛¤or ❿ to
choose YES or NO. Setting YES will reverse the print order and sort
the print job.
Example: 2 copies of a 3-page document
1
1
œ¤
œ¤
NO
6. When the desired setting is selected, press START/ENTER or COPY
to begin the copying.
Note: Pressing COPY at any time begins the copy operation immediately
without displaying the remaining options.
3
2
2
3
page 3.9.
3
3
2
2
1
1
œ¤
œ¤
YES
3.19
Stand-alone Fax