Inspur NF5280M5 Acceptance Manual page 20

Expected result
Description
Table 2-8 Web Interface—System Logs on the WebUI
Item
Objective
Prerequisites
Procedure
Copyright © Inspur Electronic Information Industry Co., Ltd.
7. Restart the server and check whether the setting takes
effect.
8. Select No override and click Save.
9. Restart the server and check whether the setting takes
effect.
1. The system startup options Hard Drive, DVD-ROM,
FDD/Removable Device, PXE, and No Override are
displayed.
2. The system boots from the DVD-ROM drive.
3. The system boots from the PXE.
4. The system boots based on the BIOS settings.
Acceptance options.
Content
To verify system logs on the WebUI.
AC power is supplied to the server.
The BMC network port IP address has been set.
Internet Explorer 8.0/9.0/10.0, Firefox 9.0 has been installed on
the terminal.
The terminal is connected to the BMC network port on the
target server over the network.
1. In the address box, enter http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx is the static BMC ip address that has
been set)
2. Enter the user name root and the default password, and
click Log In.
3. Choose Alarm&SEL > System Events and view BMC
logs in the right pane.
Inspur proprietary and confidential information
19