Inspur NF5280M5 Acceptance Manual page 19

Expected result
Description
Table 2-7 Web Interface—System Boot Option on the WebUI
Item
Objective
Prerequisites
Procedure
Copyright © Inspur Electronic Information Industry Co., Ltd.
5. Select the BIOS software upgrade package and click
Upgrade
1. The BIOS and BMC are upgraded.
2. The BIOS and BMC versions are correctly displayed. The
textbox for importing upgrade packages is displayed.
3. The upgrade progress bar is properly displayed.
Acceptance options.
Content
To verify that you can set the system boot option on the WebUI
AC power is supplied to the server.
The BMC network port IP address has been set.
Internet Explorer 8.0/9.0/10.0, Firefox 9.0 has been installed on
the terminal.
The terminal is connected to the BMC network port on the
target server over the network.
The DVD-ROM drive is connected to the server, and the PXE is
properly configured.
1. In the address box, enter http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx is the static BMC ip address that has
been set)
2. Enter the user name root and the default password, and
click Log In.
3. Choose Configuration > Boot Device.
4. Select DVD-ROM and click Save.
5. Restart the server and check whether the setting takes
effect.
6. Select PXE and click Save.
Inspur proprietary and confidential information
18