Inspur NF5280M5 Acceptance Manual page 10

Prerequisites
Procedure
Expected result
Description
Table 1-8 Hard Disk Controllers
Item
Objective
Prerequisites
Copyright © Inspur Electronic Information Industry Co., Ltd.
The structure of the mainboard and hard disk backplane is
proper, and hard disks are detected after the server is powered
on.
1. Power on the system, log in to the web interface through
the management network port. Press Ctrl+C to enter
controller card setup screen during the system
startup.( UEFI mode needs to be viewed in the BIOS)
2. View the LSI SAS 3008 BIOS version and the firmware
version on the displayed screen.
3. On the Adapter Properties screen, check the NVDATA
version.
4. On the SAS Topology menu, expand the menu, and check
the hard disk model and quantity.
1. The SETUP screen is displayed after you press Ctrl+C.
2. The LSI SAS3008 BIOS versions, firmware versions, and
NVDATA versions are displayed.
3. The hard disk model and quantity are the same as actual
configurations.
None
Content
To verify that the RAID controller card operates properly.（LSI
SAS 3108）
The structure of the mainboard and hard disk backplane is
proper, and hard disks are detected after the server is powered
on.
Inspur proprietary and confidential information
9