Inspur NF5280M5 Acceptance Manual page 16

Expected result
Description
Table 2-4 Web Interface—Remote KVM on the WebUI
Item
Objective
Prerequisites
Procedure
Copyright © Inspur Electronic Information Industry Co., Ltd.
(xxx.xxx.xxx.xxx is the static BMC ip address that has
been set)
2. Enter the user name root and the default password, and
click Log In.
Select "Information"-> "Information Overview", and
3.
check "Location Indicator" in "Virtual Button".
4. Select the "On".
5. Select the "Off".
6. Select the "Blink".
1. Select "On", the positioning light is on.
2. Select "Off" and the positioning light goes out.
3. Select "Blink" and the positioning light blinks.
The temporary indicator of the positioning indicator is blinking,
the frequency is 1Hz, and the indicator is blue. Required for
acceptance.
Content
To verify the remote KVM on the WebUI.
AC power is supplied to the server.
The BMC network port IP address has been set.
Internet Explorer 8.0/9.0/10.0, Firefox 9.0 has been installed on
the terminal.
The terminal is connected to the BMC network port on the
target server over the network.
1. In the address
(xxx.xxx.xxx.xxx is the static BMC ip address that has
been set)
Inspur proprietary and confidential information
box, enter http://xxx.xxx.xxx.xxx
15