Inspur NF5280M5 Acceptance Manual page 17

Expected result
Description
Table 2-5 Web Interface—IP Address Configuration on the WebUI
Item
Objective
Prerequisites
Procedure
Copyright © Inspur Electronic Information Industry Co., Ltd.
2. Enter the user name root and the default password, and
click Log In.
3. Choose Remote > Remote Virtual Console.
A page is displayed, allowing you to use remote KVM
Required for acceptance.
Content
To verify that you can configure an IP address for the server on
the WebUI.
AC power is supplied to the server.
The BMC network port IP address has been set.
Internet Explorer 8.0/9.0/10.0, Firefox 9.0 has been installed on
the terminal.
The terminal is connected to the BMC network port on the
target server over the network.
1. In the address
(xxx.xxx.xxx.xxx is the static BMC ip address that has been
set)
2. Enter the user name root and the default password, and
click Log In.
3. Choose Configuration > Network. On the displayed page,
check that the IP address obtaining mode, IP address,
subnet mask, default gateway, and MAC address of the
BMC are displayed.
4. Select Automatically obtain IP address and check that all
parameters below are unavailable.
5. Select Manually set IP address, enter an IP address, subnet
mask, and default gateway, and click Save. Ensure that the
Inspur proprietary and confidential information
box, enter http://xxx.xxx.xxx.xxx
16