Inspur NF5280M5 Acceptance Manual page 15

Expected result
Description
Table 2-3 Web Interface—UID Indicator on the WebUI
Item
Objective
Prerequisites
Procedure
Copyright © Inspur Electronic Information Industry Co., Ltd.
4. On the Virtual Power Buttons page, click Power On and
then Yes.
5. On the Virtual Power Buttons page, click Power Off and
then Yes.
6. On the Virtual Power Buttons page, click Forced System
Reset and then Yes.
7. Choose Alarm & SEL on the menu bar, choose System
Events in the navigation tree, and view system event logs.
1. The options Power On, Power Off, and Forced System
Reset are displayed.
2. After you select Power Off, the OS shuts down and the
server powers off.
3. After you select Power On, the server is powered on and
the OS is started.
4. After you select Reset, the server OS restarts successfully.
5. The power-on and power-off operations are logged
successfully.
Required for acceptance
Content
Configure positioning indicator for the server on the WebUI.
AC power is supplied to the server.
The BMC network port IP address has been set.
Internet Explorer 8.0/9.0/10.0, Firefox 9.0 has been installed on
the terminal.
The terminal is connected to the BMC network port on the
target server over the network.
1. In the address
Inspur proprietary and confidential information
box, enter http://xxx.xxx.xxx.xxx
14