Section 4.3: Header Components; Section 4.4: Remove The Header Cover - Nabco GT1175 Installation Manual

GT1175 Standard Slide Doors Installation Manual; with U30 Control
P/N C-00105
Power/Operator/Control: Header Width is wide, but Operator still needs to be installed between the Power Supply
X
and the U30 Control.
X
Power Supply
DN 0536
Power/Control/Operator: Header Width is wider. Operator can be installed to the right of the Power Supply and the
X
U30 Control.
X
Power Supply
DN 0535
SECTION 4 .3: Header Components
MOTO R 12P
POWER
61
6B GYRO T EC H
H
62
BA
ERROR Adjustments to the door can only be made
with the NABCO Handy Terminal .
Do not disassemble the control box
There are no user serviceable parts inside.
made by authorized NABCO facili es. To maintain warranty ,repairs must be
DN 0369
1 Power Cut Off Switch
2 DS 150/U30 Power Supply
3 Handy Terminal Harness
4 U30 Microprocessor Control
5 DS 150 Operator
SECTION 4 .4: Remove the Header Cover
1. Remove (2) 8-32x0.625L Flat head screws. Remove Header Cover by lifting it up and then pulling it out.
2. Unplug the Sensor (if equipped). Remove Parts boxes and/or Parts bags from inside Header.
Cover in
Closed Posi on
8-32 x 5/8"
Phillips Head Screw
DN 0393
6 of 56
WA RNING
No . HANDY TERMINAL 6P
To protect against risk of fire
cer fied NABCO power supply. or electric shock,use only the Microprocessor Controller
248901-
Mode SW Usage
Open M0 M1 Open MODE FUNCTION [SLIDING DOOR
Gn d Open TWO WAY ONE WAY 12VDC+ 9DC12V SYMBO L No . 1
Gn d Gn d HOLD OPE N 12VDC-(Common) 7 2
Open Gn d NIGH T Holding Beam Interior A c va on 61 6B 3 4
CAUTION Reduced Opening Switch H 5
Mode Switch (see Mode SW Usage shown le ) M1 M0 7 6
Exterior A c va on 62 8
Sequen al A c va on Breakout Detector BA SQ 10 9
Sidelite Presence Sensor SL S 11
30V(42.4Vpeak)max Contact Output (Class2 Load only) N/O OU T. A 12
5Amax.(0-20V), 3.2Amax.(20-30V) N/C Common OU T. B OU T. C 14 13 12
Auxiliary Output (Open-Collector) OU T 15 7 0
12VDC-(Common) 7 16
N/A
A-00717
M-01517
V-00020
M-00395
12
7 0
DS150 Operator
HEADER
U30 Microprocessor Control
WARNING
No. HANDY TERMINAL･6P
MOTOR･12P To protect against risk of fire
or electric shock,use only the
Microprocessor Controller
certified NABCO power supply.
248901-
Mode SW Usage
POWER M0 M1 MODE
Open Open TWO WAY FUNCTION [SLIDING DOOR] SYMBOL No.
61
Gnd Open ONE WAY 12VDC+ 9DC12V 1
GYRO TECH
Gnd Gnd HOLD OPEN 12VDC-(Common) 7 2
6B
Open
Gnd NIGHT Interior Activation 61 3
H Holding Beam 6B 4
Reduced Opening Switch H 5
62 CAUTION
Mode Switch (see Mode SW Usage shown left) M0 6
M1 7
BA
Exterior Activation 62 8
ERROR Sequential Activation SQ 9
Adjustments to the door can only be made
with the NABCO Handy Terminal. Breakout Detector BA 10
Sidelite Presence Sensor SLS 11
Contact Output (Class2 Load only) N/O OUT.A 12
Do not disassemble the control box.
30V(42.4Vpeak)max.
There are no user serviceable parts N/C OUT.B 13
inside. 5Amax.(0-20V), 3.2Amax.(20-30V) Common OUT.C 14
Auxiliary Output (Open-Collector) OUT 15
To maintain warranty,repairs must be 12VDC-(Common)
7 16
made by authorized NABCO facilities.
HEADER
6 Belt Clip Assembly
7 Timing Belt 3/4" wide
8 Idler Assembly
9 Anti Rise Roller
10 Hanger Roller
Swing
UP
to Open
U30 Microprocessor Control
WARNING
No.
To protect against risk of fire
MOTOR･12P
or electric shock,use only the Microprocessor Controller
certified NABCO power supply.
248901-
Mode SW Usage
POWER M0 M1 MODE
Open Open TWO WAY FUNCTION [SLIDING DOOR]
61 Open
Gnd ONE WAY 12VDC+
GYRO TECH
Gnd Gnd HOLD OPEN 12VDC-(Common)
6B
Open Gnd NIGHT Interior Activation
H Holding Beam
Reduced Opening Switch
62 CAUTION
Mode Switch (see Mode SW Usage shown left)
BA
Exterior Activation
ERROR Sequential Activation
Adjustments to the door can only be made
Breakout Detector
with the NABCO Handy Terminal.
Sidelite Presence Sensor
Do not disassemble the control box. Contact Output (Class2 Load only)
30V(42.4Vpeak)max.
There are no user serviceable parts
5Amax.(0-20V), 3.2Amax.(20-30V)
inside.
Auxiliary Output (Open-Collector)
Figure 2 "POC" with or without Electric Lock To maintain warranty,repairs must be 12VDC-(Common)
made by authorized NABCO facilities.
12
7 0
DS150 Operator
Figure 3 "PCO" with or without Electric Lock
www.NabcoEntrances.com
Rev 5-17-19
HANDY TERMINAL･6P
SYMBOL No.
9DC12V 1
7 2
61 3
6B 4
H 5
M0 6
M1 7
62 8
SQ 9
BA 10
SLS 11
N/O OUT.A 12
N/C OUT.B 13
Common OUT.C 14
OUT 15
7 16
A-00759
M-01491
A-00042
A-00163
A-00162
Li UP to
Pull out